Anti Static Bags

• Anti Static Regardless of Humidity Levels
• 2 Mil, 4 Mil, 6 Mil, 8 Mil Thickness Options
• 1″ to 80″ wide length
• Open Top or Zipper Top / Tubing and Sheeting
• Available Blue, Clear, Green, and Pink
• Satisfies ANSI / ESD S20.20-2014 and MIL-PRF-81705D Type II Standards
• Meets IEST-STD-CC1246 E Standard Clean Level 100


7100 Series Anti Static Plastic Bags are made of a single layer of static dissipative homogeneous polyethylene (PET) that resists charging when it comes into contact with other materials or is rubbed.

Clear enough for scanning bar codes, it is available as bags, tubing, or sheeting.

Properties Specification Test Method
Color Blue, Clear, Green, Pink
Thickness 2 to 8 mil thickness Caliper
Tensile Strength 2000 to 3000 PSI ASTM-D882
Tearing Strength 65 to 450 lbs/inch/td>

Elongation (MD%) greater than 550 ASTM-D882
Dart Impact > 250 to 700 grams ASTM-D3420
Burst (Mullen) 20 to 60 PSI ASTM-D882
ESD Resistance < 1012 ohms/square ANSI / ESD STM 11.11
Static Decay Rate 5 kv- 0 Volts in less than 2 seconds Federal Test Method 101 / Method 4046 per MIL-PRF-18705D Type II
Sizes (Width) 1 inch to 80 inches
Sizes (Length) Any Length
Heat Sealing (Temperature) 250F to 375F
Heat Sealing (Time) 0.5 to 3.5 seconds
Heat Sealing (Pressure) 30 to 70 PSI


There are no reviews yet.

Be the first to review “Anti Static Bags”

Your email address will not be published. Required fields are marked *

You may also like…