Products


Home > Cleanroom Supplies > Bags > Moisture Barrier Metalized

Moisture Barrier Metalized:

Shown here on a 3600 Series bag, the 3000 Series Moisture Barrier Bags are Printed With Logo, Lot Number, and ESD Protective Symbol per ANSI/ESD S8.1 and MIL-STD-2073 standards.

Hover Over the Image to Enlarge

  • 7 Layer Aluminum Laminate Poly Composite; (3.6 mils thick)
  • Dissipates static electricity, Shields packaged content from electrostatic discharges (ESD), and Prevents moisture build up.
  • Meets IEST-STD-CC1246 E Standard Clean Level 100
Product:
Latex Gloves Fabric Specs Link

Facebook Page LinkGoogle+ Page Link

Linked In Page LinkPinterest Page Link

Material Standards. Manufactured to ANSI / ESD S20.20-2007, IPC/JEDEC J-STD-033, MIL-STD-3010 and MIL-STD-1686 standards.

Electrical Properties. 3000 Series Moisture Bags dissipate static at a rate less than 1012 Ohms Square using aluminum laminate to shield the inside of the bag from electrostatic discharges (ESD). They also have slight EMI shielding protection due to the 7 layer construction.

Uses. Used for packaging materials that are heat, humidity, and ESD sensitive. 

Sizes. Sizes listed reflect measurements of the inner dimensions of the bag.

Warranty. These bags are some of our most durable. Avoid crinkling and check for tears before re-using. Refer to information provided in ANSI/ESD S541-2008, Table 3 for testing to verify that the material is still functioning as an ESD shield.

Custom Printing is Available Upon Request.

Customers Who Bought Cleanroom Packaging Also Viewed

HEPA Fan Filter Units for Cleanroom CeilingsElimstat Ion Blower for Cleanroom and Critical Environments Link to Buy Cleanroom Nitrile GlovesIonization

 


Part numbers: 3000C

To purchase a product, call us at 888-4BENNETT (888-423-6638) or 937-324-1100 or email us at Sales@BennettnBennett.com.